rotating lid fatigue testing machine

Brand Name:MEILI

Place of Origin:CHINA

...Fatigue Testing Machines Wheel Radial Load Fatigue Testing Machine is a device with a rotating drum, which has a smooth surface and is wider than the contact area of the loading test tire. When the wheel is rotating, the test function applies a constant radial load to the wheel. 1. Test equipment Wheel Radial Load Fatigue Testing Machine is a device with a rotating...

Brand Name:Lixian

Model Number:HZ-5066

Place of Origin:China

...Right Rotation Life Fatigue Test Equipment is mainly used for left and right rotation fatigue test of display bracket. The machine consists of a sub-frame, a rotating worktable, a fixture plate that can be moved up and down, a fixture plate bracket that

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

...Rotation Wire Cable Bending Cycle Fatigue Testing Machine Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation...

Brand Name:ZL

Model Number:ZL-1027

Place of Origin:China

... at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the electricity. While the

Brand Name:GESTER

Model Number:GT-K19

Place of Origin:CHINA

Lcd Touch Control Hook Loop Adhesive Fastener Fatigue Testing Machine Application Lcd Touch Control Hook Loop Adhesive Fastener Fatigue Testing Machine is applicable for repeatedly open and close motion for touch and close fasteners. Principle Install the ...

Brand Name:Liyi

Model Number:LY-1066A,LY-1066B

Place of Origin:Guangdong, China

..., peel, loop tack and fatigue cycling on metals, tape, composites, alloys, rigid plastics and films, elastomers, textiles, paper, board and finished products. Design ...

Brand Name:YUYANG

Model Number:YYL042

Place of Origin:China

... on all sorts of spiral spring and all kinds of cars, motorcycles, motor vehicle and so on. , which also can produce special fixture, in order to adapt to the special sample of the fatigue test. The machine with reasonable structure, simple and reliable,

Brand Name:PERFECT

Model Number:PT-9021

Place of Origin:Guangdong Province ,China

...pull rod of variety luggage, baggage, trunk to do reciprocating telescopic test. By constantly tests the continuous stretching and retracting movements, and ultimately to test rod generate gap, loose or connecting rod failure, and deformation conditions.

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-F763

...durability of the mattress. 2. OEM 1.The usage OEM Cornell Mattress Spring Fatigue Testing Machine Using a horizontal hexagonal wooden drum roll or cylinder (both ends of the diameter of 250 mm, the middle part of the 300 mm, rolling back and ...

Brand Name:Kejian Kinsgeo

Model Number:KJ-7026

Place of Origin:Dongguan China

75mm LCD Fatigue Tester Machine , Dynamic Fatigue Testing Machine with 35kg Weight Uses: This machine is used for testing the zipper performance under horizontal and vertical tension for request number of times. The machine catches the head of zipper to ...

Brand Name:PTE

Model Number:PLG-300KN Universal Dynamic Tensile and Compression Fatigue Test Machine

Place of Origin:China

...Fatigue Test Machine Electromagnetic resonance High-frequency fatigue testing machine has simple structure, convenient operation, high efficiency, low energy consumption and other characteristics, therefore it widely is used in the field of military scientific research, colleges and universities and industrial production. High-frequency fatigue testing machine is widely used for testing

Brand Name:JINHAIHU

Model Number:JSX-1904

Place of Origin:China

...four - wheel load fatigue life test；The test procedure conforms to GB/ T 11545-2008 automotive V belt fatigue life test method, GB/T13552-2008 Test method for fatigue life of automobile multi - wedge belt. Touch screen digital display test power, torque,

Brand Name:iqualitrol

Model Number:iGX-656

... life test of compression and torsion springs in a high-temperature oven, and to perform a reciprocating fatigue test at a certain temperature, speed, and stroke. It is made of variable frequency motors, imported accessories, bearings, linear sliders,

Brand Name:Great Win

Model Number:GW-054

Place of Origin:CHINA

...times, the test piece is cut into 75X20mm, and then the test piece is pressed by the weight of the roller itself to make it evenly fit, and then another Purchased tensile testing machine to determine adhesion and bond strength. •Technical Specifications:

Brand Name:SKYLINE

Place of Origin:China

... is used for applying force. The bicycle frame is mounted on the test fixture and fixed, and a certain frequency, load and test times are applied thereto. The fatigue applied force is judged by checking the damage degree of the sample after the test.

Brand Name:HTI

Model Number:TNJ-013

Place of Origin:Guangdong,China(Mainland)

Elastic Fatigue Testing Machine With CNS8158 QB/T2155-2004 Standard Description: Elastic Fatigue Testing Machine is used for testing the flexibility change of sofa backrest and seat's elastic under the process of repeated use,which is great relationship...

Brand Name:Haida

Model Number:HD-J229

Place of Origin:China

Scooter Handle Bar Fatigue Testing Machine Scooter Testing Equipment Application This tester is designed in accordance with ASTM F2264. This machine is suitable for testing the handles when the front wheels are rocking, such as the handlebars of baby ...

Brand Name:Gaoxin

Model Number:GX-2042

Place of Origin:China

Fatigue Testing Machine 1. Product Name:fatigue testing machine 2. Product Model:GX-2042 3. Standard:DIN-3415,SATRA PM123 4. Principle:The tester would repeatedly do the peeling and gluing tests for a set time. Then cut the sample into 75x20mm standard piece and glue the sample evenly by the load. Finally, use the tensile testing machine to test...