roller rock bits

Brand Name:MIROC

Model Number:6 3/4"(171 mm)

Place of Origin:Hebei, China (Mainland)

...used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with ...

Brand Name:ROSCHEN

Model Number:6 5/8"

Place of Origin:China

...Roller Drill Bits rock bit weight on bit and RPM operating suggestions Rock bit weight on bit and RPM operating suggestions 17.5 in. GTX TCI Tricone Drill Bit, IADC 435 Description: The group of Roschen GT™, GTX™, GX™ and STX™ tricone drill bits from Robert Roschen has accumulated significant field experience over the last decade, becoming the drill bits...

Brand Name:New

Model Number:7 1/2inch

Place of Origin:China

Non-sealed Roller Air Bearing Mining Roller Cone Bits Tricone Roller Rock Bit 6 12 14 5 12 Tricone Drill Bit This series bits are non-sealed Roller Bearing bits that are cooled and cleaned by air with fast drilling speed and good strength which are used...

Brand Name:MIROC

Model Number:Tricone Drill Bit

Place of Origin:China (Mainland)

... Strength 6 3/4" IADC635 Tricone Drill Bit TCI Roller Rock Bits TCI Tricone bits offer a variety of carbide inserts such as spherically shaped inserts for very hard rock or conically shaped inserts for softer rock. The number of rows of inserts is directly...

Brand Name:GLORYTEK

Model Number:8 3-4

Place of Origin:China

...is suitable for oil, gas, water well and geothermal drilling operations. The drill bit adopts tungsten carbide tooth (TCI) structure, which has the characteristics of strong wear resistance and high drilling efficiency. It is recommended for sandstone,

Brand Name:Tianying

Model Number:IADC 745

Place of Origin:CHINA

... of a bit body with three moveable conical rollers equipped with cemented carbide inserts. The idea is the crush the rock by rolling the inserts against the rock with appropriate rotation speed and feed force. Carbide inserts are distributed over the three

Brand Name:FLRT

Model Number:12 1/4 FA637G

Place of Origin:China

...Rock Bit, Geothermal Well Drilling , TCI Bit​ RECOMMENDED DRILLING PARAMETERS FOR APPLICATION Types & IADC Code 417 437 447 517 527 517 527 537 547 617 627 637 WOB KN/mm(Bit Dia.) 0.4~0.9 0.4~0.9 0.35~1.0 0.35~1.0 0.5~1.0 0.6~1.1 0.7~1.2 Lb/in. (Bit Dia.) 2285~5142 2285~5142 2000~5714 2000~5714 2857~5714 3428~6285 4000~6857 Rotation Speed (Rpm) 140~60 240~70 125~50 ~60 110~50 100~40 80~4 Roller cone bits A roller cone bit

Model Number:different models

Place of Origin:CHINA

rock roller bit, roller bit, tricone bit, roller bits, tircone rock bit, steel tooth bit, steel-tooth cone bit Our company provide pipe jacking machine, new and used hdd machine, drill rod, drilling tools like barrel reamer, fluted reamer, rock reamer, sonde housing, tricone bit...

Brand Name:ENG

Model Number:8500

Place of Origin:China

... of carbide inserts such as spherically shaped inserts for very hard rock or conically shaped inserts for softer rock. The number of rows of inserts is directly related to the type of application and the size of hole to be drilled. here are also open and

Brand Name:New Diamond

Model Number:9 7/8" 645 251mmTricone drill Bits

Place of Origin:Hunan, China (Mainland)

...Bit Drill bits are the most widely used in oil drilling and geological drilling. Tricone bits have the effect of rocking, crushing and shearing the formation rock during rotation. Therefore, the roller cone bit can adapt to various soft, medium and hard formations. Especially after the emergence of jet-type roller bits and long-nozzle roller cone bits, the roller bit...

Place of Origin:HeBei . China

...Roller Cone Bit And Oil Well Bit And Oil Rig Three Hole Drilling Tool Introduction A tricone bit is a mechanical drill bit located in the bottom hole assembly. The bit cuts away the surface of the rock being drilled through rotation and mechanical friction caused by the teeth of the bit. Tricone bits...

Brand Name:JCDRILLS

Model Number:12''

Place of Origin:Hebei,China

...bits or tri-cone bits, have three cones. Each cone can be rotated individually when the drill string rotates the body of the bit. The cones have roller bearings fitted at the time of assembly. The rolling cutting bits can be used to drill any formations if

Brand Name:Shitan

Model Number:STR

Place of Origin:HEBEI CHINA

... and gas drilling, geological exploration, and water well drilling. Its core advantage lies in its adaptability to multiple types of rock formations and efficient crushing ability. With the structural design of "three cone collaborative operation", it can

Brand Name:SANROCK

Model Number:Customized

Place of Origin:Zhejiang, China

...Roller Cone Bits Roller cone bits are predominantly deployed in rotary drilling operations across multiple industries. In oil and gas exploration, they drill through sedimentary formations (shale, limestone, sandstone) for wellbores, excelling in vertical and directional drilling up to intermediate depths. The mining sector utilizes them for blast hole drilling in open-pitoperations, penetrating coal, iron ore, and hard rock

Brand Name:Pangolin

Place of Origin:HeBei China

Rock Bit Tricone Drill Bit 9 7/8 Inch Roller Bit Drilling HDD Drilling Tools Introduction Cutting Structure In response to the characteristics that inserts in different areas on the cone have different cutting ...

Brand Name:Ohang Tech

Place of Origin:China

...Rock Bit Inserted Teeth Product Description Product Features RRI (Roller Bearing-Rubber Sealing-Inserted Tooth) bits is a kind of ideal and economic tool in high speed well drilling. Product Features: -Sealed roller bearing structure is placing the cylinder roller...

Brand Name:MONTON

Model Number:128720KAI

Place of Origin:CHINA

...Rock-bit ball axial thrust bearings and carbide radial bearings Model of Drilling Tools Bearings d D H LZ203 128720KAI 100 174 656 LZ203 128720A 100 176 400 Mud Motor Bearing Our main bearings products including bearings of petroleum screw drilling tools, equal-wall-thickness rubber stator of petroleum screw drilling tools, roller bearings(bearing roll),55SiMoVa or 8620 steel ball of three-roller rock bit, roller...

Brand Name:TUFF

Model Number:8 1/2"

Place of Origin:China

Bore Piles Hard Rock Drill Roller Cone Bits With API Standard For Core Barrel ♥ Cutting Structure : The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit; ♥ Gauge Structure: Multiple gauge ...

Brand Name:YJ

Model Number:YJ-YL001

Place of Origin:China

... of drill, mainly disorderly cutting broken rock. It is suitable for old well sidetracking and deepening the slim hole drilling operation under high rotary speed and drilling pressure. 1. Its application field is ...