multipurpose 1x2 optical switch

Brand Name:GaPho

Model Number:Fiber Optic Switch

Place of Origin:China

... Optic Switch 1x2 Magnet Fiber Optical Swit agnet Fiber Optical Switch is connected to the optical path by connecting or blocking the optical signal, the switch has nonmechanical configurations and activated via an electrical control signal, the switch als...

Brand Name:GEZHI or OEM

Model Number:FSW-48D1x2

Place of Origin:China

...1x2 Optical Switch Matrix Remote Control Programmable Optical Switches GEZHI's 48pcs Duplex 1x2 Optical Switch Matrix Remote Control Programmable Optical Switches is a kind of light path control device. plays a control light path and convert the light path. The FSW-48D1x2 consists of 48pcs of Duplex 1x2 synchronous switch light path combinations of mechanical optical switch, optical switch light path control switch...

Brand Name:HILINK

Model Number:HL-SW1X2-5m

Place of Origin:China

... Isolation 1X2 Optical Switch Non Latching Control Type 3 Years Warranty General The 1x2 Mechanical Bi-directional Fiber Optic Switch connects optical channels by redirecting 1 incoming optical signals into 2 output fibers. The switch has integrated ...

Brand Name:YOGEL

Place of Origin:CHINA

... Information: Specification: Parameter Type Value 1x1,1x2 Wavelength (nm) 1310 or 1550 1064 Operating bandwidth (nm) ±15 Insertion Loss (dB) ≤0.5(Typ 0.4) ≤0.7(Typ 0.5) PDL(...

Brand Name:GEZHI or OEM

Model Number:GZ-Optical Switches

Place of Origin:China

...channels by redirecting an incoming optical signal into a selected output fiber. GEZHI Photonics’ 1x2 Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as

Brand Name:OLYCOM

Model Number:OSW1x2

Place of Origin:China

1x2 Mechanical OSW Fiber Optic Switch Introduction Olycom's 1x2 Mechanical Fiber Opitc switch is used to turn on and turn off optical signal. The 1x2 Mechanical Fiber Optic Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical...

Brand Name:SHKE

Model Number:1*2 Mechanical Fiber Optical Switch

Place of Origin:China

...Optical Switch Description: The 1x2 optical switch is connected to the optical path by connecting or blocking the optical signal, the product is controlling by electrical signal to switch the optical path. the excellent design makes the product have the advantages of high stability, high reliability, low loss, which are widely used in the switching and protection of optical...

Brand Name:Unifiber or OEM

Model Number:1x2 2x2 Single Mode MEMS Optical Switch

Place of Origin:China

1x2 2x2 Single Mode MEMS Optical Switch 1310nm 1550nm 5V Unifiber 1x2 MEMS Bi-directional Fiber Optical switch, based on Microelectromechanical Systems (MEMS) technology, is a compact optical switch which connect optical channels by redirecting 1 incoming optical signals into 4 selected output fibers. The switching...

Brand Name:Linkopto , or OEM

Model Number:Metal case 1x2 fiber Optical Switch

Place of Origin:China

...1x2 Fiber Optical Switch LP-OSW-1×2 Optical Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)27.0×(W)12×(H)8.2mm. It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical...

Brand Name:INTEPON

Model Number:Optical switch

Place of Origin:China

Optical switch, 1x2 type, 1310/1550, 0.8dB insertion loss, non-latching, 0.9mm loose tube, FC/PC connector. The optical switch is used for protecting light path and it can choose the optic light path. Features Structure: 3 ports Insertion loss : ≤ 0.8dB Control type: non-latching type High return loss: return loss ≥50dB Applications Protecting the light source OADM Optical...

Place of Origin:China

Brand Name:HTD

1X2 Fiber Optic Switch Non-Latching Module Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical...

Brand Name:KEXINT

Model Number:KXT-FSW

Place of Origin:SHENZHEN

... route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its

Brand Name:ANC

Model Number:1x4 Optical Switch

Place of Origin:China

...Optical Switch SM 1310/1550nm 1m 900um FC/APC Description 1xN mechanical fiber optic switch manufactured by ANC International Co., Limited connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching...

Brand Name:Seacent

Model Number:1x2 micro type

Place of Origin:Guangdong , China

... distribution device , which also referred as optical splitter. It plays an important role in passive optical network (EPON, GPON, BPON, FTTX, FTTH and so on) by allowing a single PON interface to be shared among many subscribers. To achieve this, it is

Brand Name:E-link

Model Number:LNK-PLC-BF Series

Place of Origin:China

1x2 1x4 1x8 1x32 1x64 Bare Fiber PLC Splitter, Steel Tube, Bare Fiber 250um, No Connector Description The E-link bare fiber PLC (Planar Lightwave Circuit) splitter is a type of optical power management device with bare fiber package fabricated using silica optical waveguide technology. It is widely used in PON/ODN networks to realize optical...

Brand Name:OMC or OEM

Model Number:H018

Place of Origin:China

... and related connecting protection. IP safety rate is IP65-68. Some of them can be installed 1x2:32 PLC splitter or 2X2:16 PLC splitter. The product is excellent in sealing performance, easy for installation, wide application. It's your ...

Brand Name:UT-King

Model Number:Optical Switch

Place of Origin:China

...tems for multiplexing and routing different channels of light into or out of a single mode fiber (SMF). This is a type of optical node, which is generally used for the formation and the construction of optical telecommunications networks. "Add" and "drop"

Brand Name:DYS/OEM

Model Number:1x2 PLC splitter

Place of Origin:shenzhen

...Optical with LC/UPC Connector 1X2 Optical Fiber PLC Splitters Description of PLC Splitter PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical...