iec 60695 ignition wire tester

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:Guangdong

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby.

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

IEC 60695 Glow Wire Test Apparatus Initiation Temperature And Flammability Index Testing Product information: This device is manufactured according to the standard of IEC60695-2-10, IEC 60695-2-11, IEC 60695-2-12, IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition...

Brand Name:KINGPO

...Ignition Wire Tester IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition...

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:China

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby.

Brand Name:kingpo

Model Number:KP-GWT01

Place of Origin:china

...Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire...

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-11-5,IEC60335-1, GB4706.1-2005, GB5169.5-2008 and etc.. It

Brand Name:AI

Model Number:AIC-695220

Place of Origin:China

... The hot wire ignition test chamber is designed according to IEC 60695-2-20 and GB 4943 standards and conforms to the standard hot wire ignition test method. This hot wire ignition test chamber is mainly used for testing the hot wire ignition hazard of ...

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

IEC 60695-2-20 Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview ...

Brand Name:HJ

Model Number:GW-2

Place of Origin:China

... wire tester is your first line of defense against fire risks. We know that behind every electronic and electrical product is a commitment to consumer safety. This test equipment designed for plastics, ...

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

Needle Flame Tester IEC 60695 Flame Test Machine Testing Apparatus Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0....

Place of Origin:China

Brand Name:KeRang

...Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition...

Brand Name:DAXIAN

Model Number:DX8521

Place of Origin:China

IEC 60695 Automatic Ignition Needle Flame Resistance Testing Equipment Usage: Electrical and electronic products due to the use of the process of failure: such as electronic components or electronic parts of the poor contact with overload, fault current...

Brand Name:LIYI

Model Number:LY-ZRS

Place of Origin:China

LY-ZRS IEC60695 Painting Glow-wire Test Machine for Electronic Components Usage: Glow-wire Test Apparatus is according to IEC60695-2-1 and 2-10 and Glow wire tester is to test glow wire of lighting lamps, electronic products and household appliances, <...

Brand Name:SKYLINE

Model Number:SL-SE03

Place of Origin:China

...leakage current in cable & wire and the like. It meets the requirements of Chinese GB4706.1, GB5169.5, and IEC60695-2-2 and IEC61347-1 standards. Application Electrical & electronic product Components and accessories of ...

Model Number:FGW

...wire tester,glow wire ignition tester Glow Wire Tester is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite...

Brand Name:GESTER

Model Number:GT-MC38

Place of Origin:China

Hot Wire Ignition Tester Product Introduction Standards: IEC60950, GB4943, IEC 60477-1 clause 5.2.5.4 Feature Programmable control system Precision adjustable power supply Imported aluminum fixture Equipped with test ventilation device One-button timing ...

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

...Wire Tester Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test, simulating hot elements or Thermal stress caused by a heat source or an ignition...

Brand Name:JINHAIHU

Model Number:ZRS-2

Place of Origin:BEIJING, CHINA

...wire tester Scope of application The heating wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550℃~960℃) 1 min, then sets the pressure (0.95±0.1 N)30 s of vertical burning samples. To determine the ignition...