8mm 500khz non destructive testing probe

Categories:Eddy Current Testing Equipment

Country/Region:china

Standard probe for eddy conductivity meter of TMD-105 Probes B type machine with diameter 14 mm working frequency of 60 KHz and diameter 8mm working frequency of 500 KHz of a probe; The probe is made of imported material, wear-resistant and high ...

Brand Name:GTJ

Model Number:GTJ-L800

Place of Origin:China

... the thickness of concrete or other non-ferromagnetic media; in use, the transmitting probe and the receiving probe are placed on the floor respectively. The two opposite test surfaces respectively transmit and receive electromagnetic signals, and the

Place of Origin:China

Brand Name:HUATEC

Model Number:TG4000

Non Destructive Testing Equipment Through Coating Ultrasonic Thickness Gauge TG 4000 with Velocity Range 1000 - 9999 m/s TECHNICAL DATA Display 128X64 Pixel LCD with backlight Measuring range (in two function modes of Standard mode and through coating mode) Standard mode 0.8 mm-- 300.0 mm in steel depending on the probe. Special request can reach measuring range up to 500mm Through coating mode 2.5 mm – 18.0 mm (Probe...

Brand Name:SINOWON

Model Number:TG-200

Place of Origin:DONGGUAN/CHINA

...Non Destructive Testing Machine Coating Thickness Tester with F and NF Measuring Probes Application Description: F Type Magnetic induction: ● Can measure the thickness of non-magnetic coating layers on magnetic substrate ● Such as: (aluminum, chrome, copper, enamel, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel) NF Type Eddy Current: ● Can measure the thickness of non...

Brand Name:iqualitrol

Model Number:SRT-6210

High Accuracy Easy Use Non Destructive Portable Surface Roughness Tester with RS232 Model: SRT-6210 Technical Data Download: iqualitrol Surface Roughness Tester SRT-6210 When measuring the roughness of surface, the sensor is placed on the surface and then ...

Brand Name:Gold

Model Number:ZBL-U5600

Place of Origin:Chongqing, China

... tubes or probes embedded in the concrete. One probe acts as a transmitter, while the other acts as a receiver. As the ultrasonic waves travel through the concrete, they are reflected back to the receiver by any discontinuities or changes in the concrete's

Brand Name:iqualitrol

Model Number:CM-1210-200N

Place of Origin:DONGGUAN

Coating Thickness Gauge CM-1210-200N for Non-Conductive Coatings on Non-magnetic Metals Brief Introduction: The F probes measure the thickness of non-magnetic materials on magnetic materials. The N probes measure the thickness of non-conductive coatings...

Brand Name:Btutest

Model Number:BTU-CWG

Place of Origin:Made in China

Crack Width Gauge Concrete Testing Equipment Features: Newly upgraded, with three proof shell design, waterproof, dustproof and shockproof; Imported sensor chip is adopted, with high test accuracy; The host screen is provided with scale marks, which is ...

Brand Name:Raytech

Model Number:RTG-510

Place of Origin:China

... IN STEEL DEPENDING OF THE PROBE special request can reach measuring range up to 500mm THROUGH COATING 2.5 mm – 18 mm ( DEPNDING OF THE PROBES ) TOLERANCE +/-0.05 mm IN STEEL DISPLAY RESOLUTION 0.01mm ( Less than 100.0 mm ) 0.1mm( over 100 mm ) BULIT-IN

Place of Origin:XIAMEN,china

Brand Name:COBE

Gantry Ultrasonic testing and eddy current testing system Step : Work piece will be neatly put onto the platform; Work pieces will be put onto the orbit by the mechanical hand ,and then the workpiece willl move to the testing area, then pipe rotated ,...

Brand Name:MITECH

Model Number:MFD660C

Place of Origin:China

Configuration No. Item Qty Remarks Standard config. 1 Main unit 1 With full digital TFT LCD Display 2 Straight Beam Probe 1 4 MHz, Φ10 3 Angle Beam Probe 1 4 MHz, 8 mm×9 mm, 60° 4 Probe Cable 1 Q9-C5,or optional C9- C5 5 Battery Module 1 8.8 amp hour (MB-...

Brand Name:Suzhou Desisen (DSS) Electronics

Model Number:ETP-2

Place of Origin:China

*, *::before, *::after {box-sizing: border-box; } * {margin: 0; } html, body {height: 100%; } body {line-height: 1.5; -webkit-font-smoothing: antialiased; } img, picture, video, canvas, svg {display: block; max-width: 100%; } input, button, textarea, ...

Model Number:PMUT

Place of Origin:Guangdong, China

...-use Tester Dimension 160mm*42mm*22mm Weight 97g Power 4.5V(With three 1.5V alkaline battery) Detection method Non-destructive testing, fast and convenient Usage Probe contact, the probe and gem need to ensure a 90 degree angle Measuring range

Brand Name:QingCheng AE

Model Number:SUB100

Place of Origin:CHINA

SUB100 Ultrasonic Flaw Detector SUB100 portable ultrasonic flaw detector series is specially designed for personnel use on non-destructive testing, which could testing,position,evaluation and diagnosis of various flaws. It can easily and accurately conduct...

Brand Name:Yun Neng

Model Number:3003

Place of Origin:Changzhou China

...8mm http://mao.ecer.com/test/al-tubes.com/cases/power-plant-air-cooling-tube-product-pamphlet-15462.html Features: Extruded aluminum tubes are characterized by low cost, high corrosion resistance, non-destructive testing, zero wound point and easy installation. Good corrosion resistance, weldability, thermal conductivity, light weight. Customizable length, non...

Place of Origin:China

Brand Name:chinacoal

.... When using this instrument, the emission probe is placed upon a test specimen, and the receiving probe is placed on the opposite plane (see diagram). The two probes respectively emit and receive the electromagnetic signal at the same time and measure the

Brand Name:BAXIT

Model Number:GLO-CT3

Place of Origin:China

...: 1. The sample only need the relatively smooth surface and satisfies the length and width of at least twice the diameter of probe can be. 2. Non-destructive testing on samples, samples can be reused. 3. The probe using the double-helix structure design,

Brand Name:JIETENG

Model Number:Prototype PCB Assembly

Place of Origin:China Shenzhen

Product Description: To ensure quality and reliability, we use the Flying Probe Test method, which provides a non-destructive and accurate way to test the electrical connectivity of the PCB. Our Surface Finish option is HASL, which is a cost-effective and ...