IEC60335-2-64 Clause 15.1.1 IEC Test Equipment Splash Water Test Device
|
...Test Equipment Splash Water Test Device Product information This splash water test device is according to the standard requirement of IEC60335-2-64 clause 15.1.1 and 15.1.2 to manufacture,In addition, IPX1, IPX2, IPX3 and IPX4 appliances are subjected for 5 min to the following splash test. The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60335 Splash Water Test Device 0.4Mpa Gauge With Stainless Steel Bowl
|
...Test Equipment Splash Water Test Device Product information This splash water test device is according to the standard requirement of IEC60335-2-64 clause 15.1.1 and 15.1.2 to manufacture,In addition, IPX1, IPX2, IPX3 and IPX4 appliances are subjected for 5 min to the following splash test. The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes......
Dongguan Kingpo Technology Limited
|
ISO 9185 Molten Metal Splashes Resistant Test Equipment for Protective Clothing
|
...Splashes Resistant Test Equipment Catalogs for EN 373&348&6942&367&702.pdf Introduction It is suitable to measure the resistance of protective materials to liquid metal splash.During test,certain molten metal splashes on sample which is installed at specified angel.Put a PVC film on the sample’s back to contact it.Record the change of PVC film after splashing to evaluate the damage situation.According to test......
Advanced Instruments Co.,Limited
|
MMS ISO Protective Clothing Molten Metal Splashes Resistant Test Equipment
|
...Splashes Resistant Test Equipment Introduction: It is suitable to measure the resistance of protective materials to liquid metal splash.During test,certain molten metal splashes on sample which is installed at specified angel.Put a PVC film on the sample's back to contact it. Record the change of PVC film after splashing to evaluate the damage situation. According to test......
Delta Technology (Chongqing) Co., Ltd.
|
Molten Metal Splash Resistance Test Equipment For Protective Clothing
|
...Splash Resistance Materials Test Machine Introduction: Evaluate the material's resistance to liquid metal splash. During the test, an appropriate amount of molten metal is sputtered onto the sample placed at an angle. Attach a PVC film to the back of the sample to contact it. The damage is evaluated by recording the change of the PVC film after the sputtering process. According to the test results, repeat the test......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
GB3048 General Conductor Resistance Test Device High Accuracy Kingpo
|
...Resistance Test Device Product information: This device is the special appliance used for measuring the conductor resistance. It is applicable not only for the electrical wire whose length is 1 meter, but also the length of thousands meters. The design principle and the measurement accuracy completely conform to the standard requirement of GB3048. Technical parameters: 1) Power supply:AC 220V 50Hz； 2) Resistance...
KingPo Technology Development Limited
|
IEC 60335-2-36 Clause 18.102 Commercial Induction Cooker Heat Resistance Test Device
|
... materials. The structure should be able to ensure the thermal stress occurring in normal use. And after 500 cycles of use, the surface water overflow resistance of...
Sinuo Testing Equipment Co. , Limited
|
Surface Electrical Resistivity Testing Device 3D Resistivity Meter Imaging Underwater Gold Geophysical Exploration Equipment
|
...increase the depth of detection and scanning area. A 30-meter electrical resistivity survey measurement cable allows scanning of large targets up to 30 meters in depth over a 1000 m2 area. An important feature of the adrenalin geophysical device is its...
Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd
|
ISO 20344 EN 344 Shoe Soles Rubber Wear Resistance Tester Shoe Boot Abrasion Resistance Test Device
|
...Resistance Tester DIN 53 EN 344 Shoe Boot Abrasion Resistance Testing Equipment Product Description Product Introduction This wear resistance tester is used to measure the wear resistance of rubber on shoe soles. The sample is placed on the drum and a certain load is applied. Then, a standard friction paper is wrapped around the drum for friction. The operator records the weight before and after the test...
DONGGUAN LONROY EQUIPMENT CO LTD
|
Ozone Resistance Test Device Conforming To IS 10810 (Part 13), IEC 60811-403, ASTM D 470, IS 3400 (Part 20) : 1994, ISO 1431-1/1994 And ASTM 4575.
|
...resistance of elastic and polymer materials of cables to ozone erosion in accordance with IS 10810 (Part 13), IEC 60811-403, ASTM D 470, IS 3400 (Part 20) : 1994, ISO 1431-1/1994 and ASTM 4575. The test apparatus should include a test chamber, an ozone generator with a high...
Dongguan Chengfeng Testing Equipment Co., Ltd
|
Submit your “splash resistance test device” inquiry in a minute :