Fire Propagation Index Testing Equipment for Laminated Foil by BS476 Part 6
|
...Testing Equipment for Laminated Foil BS476-6 FPT.pdf Introduction: BS 476-6 is a test method of measuring the flame propagation properties of materials, primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test......
Advanced Instruments Co.,Limited
|
Plastic Film Aluminum Foil Material Heat Sealing Testing Equipment Of Food Packing
|
... Film Aluminum Foil Material Heat Sealing Testing Equipment Of Food Packing Summary: Packaging Heat Seal Strength Tester seals the specimen under specified temperature, pressure and dwell time, to test the heat seal strength of laminated films. MRE(......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
FPT Laminated Foil Fire Performance Testing BS476-6 Tester
|
... evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the two...
Delta Technology (Chongqing) Co., Ltd.
|
Adhesive Tape Rubber Testing Machine , Electric Peeling Strength Testing Equipment
|
...Rubber Testing Machine , Electric Peeling Strength Testing Equipment 1,Production description: Adhesive Tape Strength Peeling Strength Testing Machine is used to test the adhesive strength of cooper-foil circuit on the PC board or tin-foil, aluminum-foil, ......
Dongguan Haida Equipment Co.,LTD
|
Metallic Foil Electrical Test Equipment Bending Strength Tester Wh-8857
|
...: 1, the test piece size: width: 10 ± 0.3mm, length 100 ~ 500mm 2, load: 255 ± 5g 3, the tortuous angle: 90 ± 20 4, tortuous speed: 6 times / sec 5, the test method: A , The test piece was mounted on the test apparatus until the test piece was bent,...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
IEC60558-1 Fig6 Mandrel Tester Device Light Testing Equipment 100N / 150N
|
...Testing Equipment 100N / 150N Product information: This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16. The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth surface finish. A metal foil shall be placed closely to the surface of the specimen and subjected to a pull force of 1 N. The metal foil......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60558-1 Fig 6 Mandrel Test Equipment Apparatus Machine OEM / ODM Avaialble
|
...specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth surface finish. A metal foil shall be placed closely to the surface of the specimen and subjected to a pull force of 1 N. The metal foil shall be so positioned that its...
KingPo Technology Development Limited
|
Laminated Glass Impact Testing Machine Architecture , Impact Test Equipment
|
Laminated Glass Impact Testing Machine Architecture , Impact Test Equipment Model: RS-8220LQ Application: This tester is design according to the standard GB/T9962-1999- 6.11, It satisfys the Architecture laminated glass impact testing requirement. Standard......
Infinity Machine International Inc.
|
Excellent Design Eddy Current Inspection Equipment Eddy Current Test Equipment
|
... be tested, you can choose model HEC-103B with 500KHz probe, it can test 1.3mm thickness, if you have much thinner foil parts to be tested, we have other model HEC-106 and HEC-107. Features Beautiful appearance, easy to carry about and grasp, simple and...
HUATEC GROUP CORPORATION
|
Gantry Type Tensile Test Equipment 5kN Compression Bending Test
|
... materials such as rubber, plastics, wires and cables, textiles, waterproof materials, non-woven fabrics, metal wires, metal foils, metal plates and metal rods. It can also be used with special fixtures. It is suitable for tensile, compression, peeling,...
Sinuo Testing Equipment Co. , Limited
|
Submit your “laminated foil testing equipment” inquiry in a minute :