IEC60950-1 Annex AA Mandrel Test Device With Three 50N Weights
|
... forming REINFORCED INSULATION , are used. One sample at a time is fixed to the mandrel of the test fixture (Figure AA.1) as shown in Figure AA.2. A downward force of 150 N ± 10 N is applied to the free end of the sample (see Figure ......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60065 Figure 16 Mandrel Test Device For Insulation Anti Damage Strength Verification
|
... Application: Insulation anti damage strength verification for non separable thin layer materials. Test sample: Non separable thin layer material. Feature: The position of 10°and 230°are set with mechanical limit, not only to ensure the accuracy of...
KingPo Technology Development Limited
|
IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material
|
...Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test......
Dongguan Kingpo Technology Limited
|
IEC60065 Mandrel Test Equipment For Insulation Film Abrasion Test
|
...Mandrel Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel Test Equipment is designed according to IEC61588 figure 6, IEC60950 annex A, IEC60065 and GB1921. It is used for the insulating thin layer of the power transformer and supply unit as well as the similar products to do the spindle test, mechanical strength test and abrasion test. This test device...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60950 Communication Test Equipment , Mandrel Test Equipment HX9804
|
...n layer material. Feature:The position of 10°and 230°are set with mechanical limit,not only to ensure the accuracy of the test angle, but also to achieve a simple operation method; weight with a hanging ring, in case of a point is damaged because of too...
shanghai kerang technology co ltd
|
IEC 60950-1 Metal Mandrel Test Apparatus For Tensile Strength Verification
|
...Mandrel Test Apparatus For Tensile Strength Verification Product Information For Metal Mandrel Test Apparatus: This test apparatus conforms to IEC 62368-1:2018 clause 5.4.4, IEC60950-1:2013 clause 2.10.5.8, Annex AA, figure 14~16, IEC60558-1 Fig6, etc. It is used for tensile and electrical strength verification for non-separable thin layer materials. This test......
Sinuo Testing Equipment Co. , Limited
|
Mandrel Test IEC 60950 Cable Testing Equipment
|
Mandrel Test Audio Video Apparatus Insulation Material IEC 60950 Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Technical parameters: Test object non-separable thin sheets of audio video apparatus Reference standard IEC 60950-1, IEC 61558-1 Test mandrel test Station 1 Weights 50N * 3pc Test mandrel Triangle bar with a tip Rotate angle 230° Test......
Guangzhou Shice Equipment Co., Ltd.
|
IEC 60811-504 2012 Mandrel Test Apparatus & Impact Test Apparatus
|
... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Ball Pressure Test Device with NM300-6 , IEC60695-10-2 , IEC 60884-1 , IEC60320-1
|
...Test Device with NM300-6, IEC60695-10-2, IEC 60884-1, IEC60320-1 standards Specificaitons: 1.0 Comply with the standards of NM300-6, IEC60695-10-2(2003), IEC 60884-1, IEC60320-1, IEC60335-1, IEC60598-1, IEC60950-1.；GB4943,GB2099. 2.0 Ball diameter: 5mm±0.05mm(Radius 2.5mm) 3.0 Ball pressure: 20N(including loading device and ball) 4.0 Test......
Dongguan Hust Tony Instruments Co.,Ltd.
|
Mandrel IEC Test Equipment 150N Force Manual Control
|
Mandrel Test Device IEC Test Equipment 150N Test Force Manual Control Standard: IEC 61558-1 ‘Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests’ clause 26.3.4; IEC 60065-1 ‘Audio, ......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Submit your “iec60950 1 mandrel test device” inquiry in a minute :