Checking Conductors Damage IEC60884 Fig11 Test Apparatus
|
...standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the ......
Guangzhou Shice Equipment Co., Ltd.
|
IEC60884-1 Table 18 Electrical Safety Test Equipment Power Cord Anchorage Torque Test Apparatus
|
... clause 23.2 table 18. It’s used to test the power cords and cables for household appliances. Parameters: 1. Torque disk diameter: 100mm 2. Weight: equipped with 2N, 3N 5N, 7N, and 8.5N weight, each 1 piece, can realize 0.1 0.15, 0.25, 0.35 and 0425N.m...
Pego Electronics (Yi Chun) Company Limited
|
20N Heat Resistance Verification Compression Test Apparatus IEC60884-1 Figure 38
|
...Test Apparatus IEC60884-1 Figure 38 Product details: This apparatus confirms to the standard requirement of IEC60884-1 figure 38. It is used to test the pressure-resistant properties of the electrical accessories and mounting box under the circumstance of being heated. This testing equipment should be put into use with the heating box. Technical parameters: Standard IEC60884......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60884 Figure 20 Apparatus For Testing Cord Retention / Cable Retention Test Apparatus
|
IEC60884 figure 20 Apparatus For Testing Cord Retention / Cable Retention Test Apparatus Product details: The cable retention test apparatus is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is aim at test cord ......
KingPo Technology Development Limited
|
IEC60884-1 Non Metallic Material External Parts Ball Pressure Test Apparatus
|
IEC60884-1 Non-Metallic Material External Parts Ball Pressure Test Apparatus Product information: The ball pressure test apparatus conforms to many standard requirements, such as IEC60884-1, IEC60335-1, IEC60950 and so on. Application: external parts of ......
Sinuo Testing Equipment Co. , Limited
|
Electric Vehicle Multiple Portable Socket Outlets Mechanical Strength Test Apparatus
|
... Mechanical Strength Test Apparatus Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.3, fig 19. IEC60884-1:2006 "Plugs and socket......
Sinuo Testing Equipment Co. , Limited
|
Standard GB5169 Glow Wire Test Apparatus , Hot Wire Ignition Test Flammability Temperature Test
|
... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or...
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Laptop Hinge Torsion Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine
|
...Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine Purpose: Laptop hinge torsion test equipment is suitable for laptop, ultrabook, monitor and the other electronic products to do the torque test, and the torsion damping life-span test......
Infinity Machine International Inc.
|
ISO4925 Advanced Brake Fluid Antioxidant Properties Test Apparatus
|
... brake fluid into a test sample, and place it with 1/8 rubber bowl and aluminum and cast iron pieces. After keeping it in the instrument for 168 hours, take it out and check for any pitting, roughness, and other corrosive phenomena on the test pieces, and...
Advanced Instruments Co.,Limited
|
10 MW Flammability Test Apparatus , Microcomputer Controlled Heat Release Rate Test Device
|
..., warehouses and components) and extensive fire resistance test verification for raw materials, buildings and physical models Meet the standard: 1. Comply with the test standards of ISO 9705 "Fire tests; full-scale room test for surface products"; 2....
Dongguan HOOHA Electrical Equipment Company Limited
|
Submit your “iec60884 3n testing apparatus” inquiry in a minute :