Test Finger Probe Telecom Test Probe For Testing Telecommunications Voltages
![]() |
Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check limited access to telecommunications voltages (TNV), mainly telephone jacks and operator areas. Satisfies basic standard for telecom......
KingPo Technology Development Limited
|
Manufacture High Precision IEC60950 Telecom Test Probe
![]() |
...Test Probe Telekom Sonde Purpose: Telecom-Test Probe meets IEC60950 Figure 2C and UL6500 Figure B.1 standards. is for the absolute share TNV circuits information technology to see if they provide sufficient protection. Contacts of terminals for TNV CIRCUITS which cannot be touched by the test probe......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC 62368-1 Figure V.3 Test Finger Probe Telecom Test Probe With IEC60950 Figure 2C
![]() |
... ACCESS AREAS there is adequate protection against contact with bare parts of TNV - 1 , TNV - 2 and TNV - 3 CIRCUITS except that access is permitted to: Test Finger Probe – contacts of connectors which cannot be touched by the test probe (figure 3); –...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60065 R6mm Stainless Steel Probe Figure 2C Telecom Test Probe
![]() |
IEC 60065 Figure 2C Telecom Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 Figure 3 and UL 6500 figure B.1 and etc. It is used to check whether the bare parts of TNV circuits of information technology equipment have sufficient protection. There is a M6 thread on the end of the handle, through where the test probe......
Sinuo Testing Equipment Co. , Limited
|
IEC 60950 Flammability Test Equipment For Arcing Resistance Test
![]() |
IEC 60950 Flammability Test Equipment For Arcing Resistance Test IEC60950 Flammability Testing Equipment For Arcing Resistance Test Of Electric And Electronic Products Standard: IEC 60950-1,BS EN 60950-1,BS 7002, UL746A,IEC60947.1, IEC730.1. Application: It is suitable for arcing resistance test......
Dongguan Kingpo Technology Limited
|
Mandrel Test IEC 60950 Cable Testing Equipment
![]() |
...Test Audio Video Apparatus Insulation Material IEC 60950 Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Technical parameters: Test object non-separable thin sheets of audio video apparatus Reference standard IEC 60950-1, IEC 61558-1 Test mandrel test Station 1 Weights 50N * 3pc Test mandrel Triangle bar with a tip Rotate angle 230° Test......
Guangzhou Shice Equipment Co., Ltd.
|
Standard Test finger probe,test probe B iec 61032 EN60335,testing probe
![]() |
... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....
ALLIED TESTING (HK) CO.,LTD.
|
IEC 61032 75N Test Probe 11 Rigid Finger Probe Anti Shock Test Finger Probe 11
![]() |
Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing......
SKYLINE INSTRUMENTS CO.,LTD
|
IEC 60950 Communication Test Equipment , Mandrel Test Equipment HX9804
![]() |
Mandrel Test Device HX9804 Standard:Confirm to IEC60950,IEC60065-1. Application:Insulation anti damage strength verification for non separable thin layer materials. Test sample:Non separable thin layer material. Feature:The position of 10°and 230°are set......
shanghai kerang technology co ltd
|
15mm Length Figure 9 Test Probe 13 Of IEC 61032
![]() |
...Test Finger Probe Figure 9 Test Probe 13 With 15mm Length Metal Pin Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 9 test probe 13. IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ IEC 60950-1 ‘Information technology equipment – Safety – Part 1: General requirements’ figure 2B. Application: Other access probes......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|