ASTM D217 Automatic Constant Temperature Cone / Needle Penetration Tester SH017
|
...Cone/Needle Penetration Tester SH017 SH017 Automatic Constant Temperature cone/needle penetration Tester is designed and manufactured according to the technical requirements and relevant regulations of GB/T269 ASTM D217 and GB/T4509 ASTM D5 standards It is mainly suitable for testing the cone penetration......
Shandong Shengtai instrument co.,ltd
|
Geotextile Cone Dynamic Perforation Tester Drop Punch GB / T17630 ISO 13433
|
...penetration of steel cones falling from a fixed height. It characterizes the degree of damage to the geotextiles caused by sharp stones falling on the surface of the geotextiles. Its performance conforms to the national standard GB/T17630 Requirements of...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
AATCC42 Fabric Impact Penetration Tester with 610mm Cone Height 335x285x1080mm
|
AATCC 42 Fabric Impact Penetration Tester Introduction: The impact penetration tester is used to determine the anti-permeability of fabrics under low impact conditions according to the standard AATCC42, and can be used to predict the anti-rain penetration ......
SKYLINE INSTRUMENTS CO.,LTD
|
45 degree AATCC 42 Water Impact Penetration Tester For Fabric
|
AATCC 42 Fabric Water Impact Penetration Tester Product Introduction Application: This tester is applicable to any textile fabric, which may or may not have been given a water resistant or water-repellent finish.It measures the resistance of fabrics to ......
Gester International Co., Ltd
|
Gys-2 Photoelectric Liquid And Plastic Limit Tester 220v 50hz
|
... report 4 Penetration depth Optical projection display 5 Power 220V±10% 50Hz The Photoelectric Liquid and Plastic Limit Tester is used to determine moisture content of upper limit of fine grain soil (liquid limit) and lower limit (plastic limit). The...
Beijing Samyon Instruments Co., Ltd.
|
Fabric Impact Penetration Water Repellency Tester 45 Degree RF4418A
|
REFOND Fabric Testing Equipment Impact Penetration Tester AATCC 42 Standards AATCC 42 GB/T 33732 GB/T 24218 YY/T 1632 YY/T 1499 ISO 18695 Product Instruction Water Impact Penetration Tester is used to determine the water resistance of fabrics under low ......
Refond Equipment Co., Ltd.
|
Antirust Heatproof Fabric Testing Machine , Geotextile Fabric Tensile Strength Tester
|
... height of cone penetration ability, characterized Chienshih drop in the surface of geotextile geotextile damage on the degree of the level of the geotextile specimen clamping In the clamping ring, so that provided a high quality cone 500mm drop from the...
Dongguan Lixian Instrument Scientific Co.,LTD
|
long distance Narrow angle quick jet full cone spray nozzle
|
... installation without the use of tools. QG 15 full cone spray nozzle with narrow angle 15 degree,Q G 30 full cone spray nozzle with narrow angle 30 degree COMMON APPLICATION Cleaning and washing of products requiring deep penetration and/or spray induced...
Eternal spray nozzle co,ltd
|
Japan Panasonic AC Servo Motor Driven Wire 45° Cone Pull Test Machine For Small Wires
|
Wire 45°Cone Pull Test Machine Model: IC1362 Application: Suitable for all kinds of small electronic products charging power cable, earphone wire, small multi-core wire for oblique 45 degree rotating life test. Features: 1. Dual station design, independent......
Infinity Machine International Inc.
|
0-14.5cm Plunger Penetration Apparatus Mortar Cement Consistency Test Apparatus
|
... known as consistency). The consistency of the mortar is expressed in centimeters of the degree of sinking of the standard cone of a certain geometry and weight at its own weight which is free to sink into the mortar mixture.Cement Testing Equipment The...
Hebei Better United Import And Export Co., Ltd.
|
Submit your “600 cone degree penetration tester” inquiry in a minute :