Children Small Test Finger Probe Kits IEC61032 Test Probe 19 Metal / Nylon Material
|
...Finger Test Probe Kits / IEC61032 Test Probe 19 1. Introduction: Test probe 19 (child small finger probe) is designed according to IEC61032 figure 13. This Probe is intended to simulate access to hazardous parts by children of 36 months or less. 2. Specification Diameter of probe 5.6mm Semi-diameter of probe 2.8mm Length of probe 44mm Diameter of first handle 25.9mm Length of first handle 101.6mm......
Pego Electronics (Yi Chun) Company Limited
|
UL982 Test Finger Probe For Uninsulated Live Parts Film Coated Wire Length 101.6mm Diameter 19.1
|
... an opening which does not permit entrance of a 3/4 inch-diameter (19 mm) rod is acceptable if: a) A probe as illustrated in Figure 58.6 cannot be made to touch any uninsulated live part or moving part capable of causing injury when inserted through the...
Guangzhou HongCe Equipment Co., Ltd.
|
Figure 12 IEC61032 Children Safety Test Finger Probe
|
...Test Finger Probe 18 19 IEC61032 Main specification and corresponding technical parameters: Parameters /Model Children’s finger probe SC-F1218 Children’s finger probe SC-F1319 1 R4.3±0.05 mm R2.8±0.05 mm 2 Ф8.6±0.1 Ф5.6±0.1 Knurled finger length 57.9±0.15 mm 44±0.15 mm 4 19.3 14.67 5 19.3 14.67 6 Ф38.4±0.3 Ф25.9±0.3 7 101.6±0.3 101.6±0.3 8 Ф38.1±0.3 Ф25.4±0.3 9 451.6±0.8 464.3±0.8 Product information: Children finger...
Guangzhou Shice Equipment Co., Ltd.
|
Test Probe 11 , IEC61032-Figure 7 Test Finger Probe , Unjointed Test Finger
|
... 4, Dam- board Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1. Aluminium box and carton box, careful and tight package, make sure the ......
KingPo Technology Development Limited
|
UL Articulated Test Finger Probe With Flat And Cone Shaped Hand
|
...Test Finger Probe With Flat And Cone Shaped Hand UL 60335-2-24 Figure 101.DVA.1 Articulate Test Finger Probe With Flat And Cone Shaped Hand 10.5 - 11.5 Year Age Notes: 1 – The probes were designed with a center pin to rotate the hand with respect to the lower arm. That motion can be equivalently represented by rotating the probe. 2 – The finger ″tip″ is developed to match the dimensions of the UL articulated probe......
Dongguan Kingpo Technology Limited
|
Finger diameter 5.6mm ISO 8124-1 Standard Test Finger Probe for toys
|
ISO 8124-1 Standard Test Finger Probe & Accessibility Probe Product Introduction Application: Standard Test Finger Probe & Accessibility Probe is used to determine whether the hazardous parts of toys can be touched. If it is accessible, then conduct the ......
Gester International Co., Ltd
|
IEC 60529 Test Finger Probe B with 10N Force for IPX Test Equipment
|
...Test Finger Probe B with 10N Force for IPX Test Equipment Force Level: 10N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The Standard Test Knurled Finger Probe is the necessary appliance to prevent electric shock for household and similar electrical problem. Technical Parameters: Knurled Finger Diameter: 12mm Knurled Finger Length: 80mm Knurled Finger Length......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC 60065 2014 Clause 9.1.1.3 Test Probe 18 Ф8.6mm Children Finger Probe
|
...Test Probe 18 Ф8.6mm Children Finger Probe Product Overview: This probe conforms to the standard requirements of IEC 60065:2014 clause 9.1.1.3, IEC 61032 figure 12 test probe 18 and etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Hemispherical radius (mm) R4.3±0.05 Finger probe diameter (mm) Ф8.6±0.1 Finger probe length......
Sinuo Testing Equipment Co. , Limited
|
IEC61032 Children Test Finger 19 Safety Test Probe Test Finger
|
...Test Finger 19 IEC61032 Children Test Finger 19 Article NO.:BND-19 Specification: Children Test Finger / Children Test Finger19 1, According to : IEC61032-1997 Fig12 and Fig.13 / EN71 ASTM F963 and UL 2, Children Test Finger 19 Probe is the necessary appliance to prevent electric shock for household and similar electrical problem Technical Parameters: 1, Knurled Finger Diameter: 5.6mm 2, Knurled Finger Length......
HongKong Bonad Technology Limited
|
Test Thorn Probe HT-I16
|
Test Thorn Probe HT-I16 Standard:IEC61032 test probe 41 figure 16 and IEC60335. Application:It is intended to verify the protection against access to glowing heating elements. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature......
shanghai kerang technology co ltd
|
Submit your “101 6mm length test finger probe” inquiry in a minute :