Johnson Wedge Wire Screen Sieve Bend Stainless Steel Material Food Processing Applied

Stainless steel Johnson wedge wire sieve bend screen for food processing

the Sieve Bend Screen that is curved in profile and operates more effectively than Flat Screen Panels in the same application, that is, for dewatering and solid to liquid separation. The adjacent Profile Wires are position perpendicular to the process flow and thus enable its leading edge to ‘cut’ the flow and collect the process liquid and smaller solid particles. The much larger particles will run down the screen and are collected as a consequence.

The Sieve Bend Screen is commonly used in food processing and corn wet milling plants. In the corn wet milling process, CP Screens precisely manufactures the 120 Degree DSM Screen which is simple in shape, just like the common Sieve Bend Screen, however its very fine slot openings commonly 75 and 100 µm, are very critical.

The horizontal orientated profile wires enable the screen to effectively thicken pulp or separate fibres to a fine degree. The process flow is introduced to the DSM screen via high-pressure nozzles, which distributes the flow tangentially over the entire width of the screen. The DSM screen will then proceed to ‘slice’ thin layers of water with the accompanying fine particles, ultimately the filtrate media. This action results from the sharp upper edge on the profile wires. Through our accurate and precise optical measurement system, we can provide you with a Statistical Analysis report that underlines the mean, maximum & minimum, standard deviation and measured slot openings in a single batch.

Here is a common specification of this screen:

DSM screen hot specifications ordered by customers:

• DSM screen 1830 × 1600 mm, hole 0.7 mm.
• DSM screen mesh for sugar industry size 2400 × 1600 × 0.6 mm.
• DSM screen 45 degrees, aperture 0.75 mm, size length 2100 mm × width 1650 mm.
• DSM screen to separate plastic flake - 3/8" from water containing fiber and floating material. Feed to the screen 5% HDPE flake in water. To process 116.6 kg/min, 330 Liters/min.

2. Specifition:

(1) material:stainless steel 304,316,etc

(2) slot size:0.02-5mm or customer's requirement

(3) support bars pitch:1.5-3cm or customer's requirement

(4) wedge wire size: 1.5x2.2mm,1.5x2.5mm,2.3x3.6mm,1.8x4.3mm,3.0x4.7mm,etc

(5) support bars size: 2.3x2.7mm,2.3x3.6mm,3.0x4.7mm,3.7x5.6mm,3.3x6.3mm,etc

3. Application :

1.) Widely used in vairous kinds of medium filtering

2.) As the fitting using in the water-treating equipment ( the environment protection; the sea water transforms into the industrial water and life use water desalination treatment; running water treatment; softening treatment;

3.) The petroleum industry: the petroleum product terminal filters and the chemical acid; the alkali liquid filters, the ethyl alcohol;

4.) The organic solution recycling filter

Contect Details :

Anping Yoston Metal Wire Mesh Co.,Ltd.
No.56 Yuhua South Road , Anping Hebei China
Tel / Wechat / Whatsapp: +86 15833839680
Email: yoston@foxmail.com

Anping Yoston Metal Wire Mesh Co.,Ltd. is a divison of Top International Group (H.K) Limited. It has been in the world marketplace for more than 20 years. We started as a manufacturing firm dedicated to international business. Through the development of these years, the company already successfully grown up to a multifunctional enterprise comprising, manufacturing, processing, international trade etc. and now we have been exported to more than 40 countries and regions such as the USA, Europe, Australia, Singapore, Japan, and the Middle East etc.

Among a wide category of our products, we are most active in all kinds of wire mesh products, such as stainless steel wire mesh, metal conveyor belt , metal mesh curtain,  architectural mesh, test sieve , pizza screen etc.

Our products exported with our highly reputed "TOP" brand represent high quality and best service in the market. All our products are under ISO9001:2008 quality system demand.

Top Quality and Top Service, are our business principles.

We are ready to offer our clients:
- Good quality, reasonable price and satisfactory post-sale service.
- Convenience to buy container loads of mixed products.
- Speedy delivery and standardized transportation service.
- Diversified trade terms such as Agency, International bidding, Counter trade, OEM, Assembling or Processing on supplied materials or designs.