Digital Display Plastic Thermal Deformation Vicat Softening Point
Plastic Testing Equipment
Introduction:
1) Softening Point Testing Machine (VST) is mainly used for
deformation temperature and Vicat softening point test for
horniness pipes and tubes materials. It's suitable to measure the
HDT and VICAT character of plastics, rubber, nylon, electrical
insulation materials etc., widely used in production, research,
inspection department and institute for educations.
2) The tester is using PLC programmable controller for temperature
control LCD display operation.This is
the product of simple operation, easy to use, stable performance,
high precision products, and in the
process of test can be real monitoring test temperature and
deformation; At the end of the test system
automatically stop heating, the machine can set the target
temperature with temperature protection
function.
3) With the sample holder lifting function so that the sample
holder can be adjusted to the proper
position at the beginning and the end of the test. Negative
pressure induced air function without oil
absorption, not smoke in the process of test, to ensure the test
environment is clean.With rapid cooling
device.
Conform with standard ISO075, ISO306, GB/T8802,GB/T1633,GB/T1634
etc..
Characteristic:
1, The tester is floor model, with beautiful appearance and stable
performance, high accuracy, easy to use.
2, Three-way displacement sensor to measure the deformation.
3, Digital display temperature and displacement.
Specifications:
1) temperature control range: environment temperature~300℃
2) Heating rate: (120±10) ℃/h (12±1) ℃/6min
(50±5) ℃/h (5±0.5) ℃/6min
3) Temperature display error: 0.1℃
4) Temperature control precision: ±0.5℃
5) Maximum deformation display error: ±0.01mm
6) Deformation measurement range: 0—1.5mm
7) Sample holder number: 3
8) Heating medium: methyl silicone oil or transformer oil
9) cooling mode: nature cooling beyond 150, water cooling or nature
cooling below 150
10) Heating power: 4 kw, 220V 50HZ
11) Instrument size: 540mm×520mm×970mm
12) Rod load and tray quality: 68 g