Automatic Soft Tube Filling and Sealing Machine
Packaging materials and filling materials Scope:
1) soft tube, plastic pipe, composite pipe.
2) ointment, cream, gel viscosity fluids agents.
Automatic tube feeding→ tube position (hose container) → automatic
identification label located on pipe → → filling quantity control
test + [hose internal cleansing (option)] → → filling → heating the
tube (inner heating for plastic tube, outer heating for compound
tube) → tail shaping and sealing → tail cutting → Print → finished
Our machine advantages:
1, Host with frequency control.
2, Robot Sealing both flexible and stable filling and sealing tail
design is an open, clean and maintenance is very convenient.
3, Color positioning, selection of German, while accompanied by a
high-precision driver and stepper motor (very high requirements on
the standard configuration Servomotor), to ensure the correct
4, Anti-leak filling nozzle deep into inside of hose, while there
is a bottom-up filling process is complete when filling and
sealing, no leakage or overflow. Machine is suitable for a variety
of different physical and chemical properties of the filling
material requirements. Filling volume fine hand wheel placed in the
external body, tight regulation and very convenient to ensure
filling accuracy ≤ ± 1%, cost savings and truly accurate
5, The structure is compact, self-control, transmission closed.
6, The aircraft can be fully automatic operation system for the
tube, wash pipe, standard identification, filling, hot-melt,
sealing, play yards, trimming, the whole process of the finished
7, It is accomplished by a pneumatic supply pipe, wash pipe,
accurate and reliable.
8, Rotary hose mold with electric eye control center positioning
device, the use of photoelectric sensors complete the automatic
9, Adjusting easy disassembly, particularly suitable for the
production of large diameter hose multi-standard user, easy
adjustment and quickly.
10, Intelligent temperature control and cooling system, make
operation simple and reliable sealing.
11, Material contact parts made of 316 stainless steel, clean,
sanitary, in full compliance with the requirements of GMP.
12, The machine speed by inverter control can be adjustable.
13, Height adjust directly and conveniently.
14, Hose filling volume can be adjustable by hand wheel adjustment,
it is convenient.
15, Equipped with safety devices, open door stop, no tube no
filling, overload protection.
16, Transmission partially closed in the platform below, safe,
17, Filling and Sealing parts mounted on the platform above
semi-closed static-frame viewing hood, easy to observe, easy
operation, easy maintenance;
18,Stainless steel touch switch operation board;
19, Xiegua and tag through tube position, optionally;
20, Curved armrest with a vacuum suction device, the handrail and
the pressure tube device interaction, the hose is feed into the
upper tube station;
21, Photoelectric standard workstations, high-precision sensor,
stepper motor control hose pattern in the correct position;
22, No filling leak, the air blow-off device blew cream tail;(This
is our patent)
23, Ductless not filled;
24, Sealing temperature use (Leister hot air gun) tail pipe
internal heating, cooling External cooling device configuration;
25, Typing yards workstation will automatically code printed on the
technical requirements of the position;
26, plastic robot hose tail cut at right angles or rounded to
27, Fault alarm, overload shutdown;
28, Count and quantify downtime;
Optional: external chiller system, water cooler
Optional: Laminated barrel insulation device
Optional: barrel internal mixing device
Optional: Alien sealing device (wave-shaped sealing device;
arc-shaped sealing device; T-type punching and sealing devices,
Optional: multicolor filling system
Optional: less than 3ml / branch dedicated filling device
Optional: automatic feeding pump
Optional: finished tube output conveyor