Sign In | Join Free | My
Search by Category
Home > Electric Bicycle Part >

1.0mm-4.0mm aluminum foil self adhesive bitumen flashing tape for roofing/ waterproofing/sealing

Categories Self adhesive bitumen tape
Brand Name: Kunteng
Model Number: CL-L
Certification: ISO9001
Place of Origin: China
MOQ: 2000 square meters
Price: USD
Supply Ability: 20000000
Delivery Time: within 7-14 days after we get your deposit
Packaging Details: with shrink film and carton
whatsapp: 0086 13964795117
Thickness: 1.0mm, 1.2mm,1.5mm,2.0mm,3.0mm,4.0mm etc
Width: From 50mm to 1000mm
Length: 3M, 5M, 10M, 15M, 20M
Certificate: ISO9001
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    1.0mm-4.0mm aluminum foil self adhesive bitumen flashing tape for roofing/ waterproofing/sealing

    This products can be used for general flashing applications, sealing glazing bars, sealing leaks in gutters, valleys, down pipes, capping, caravan seams and various corrugated and flat roofs. Also suitable for sealing roof lights and repairs to cracked glass.

    a. instant waterproof seal, even in famp conditions.

    b.quick and easy to apply, no specialist tools required.

    c.4 layers or protection: lacquer foil, membrane and bitumen adhesive

    1. Product description:

    is a self-adhered membrane consisting of an SBS rubberized asphalt compound which is integrally laminated

    to a blue engineered film. The membrane is specifically designed to be self-adhered to a prepared substrate.

    2. Application:

    Construction is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works.

    Cut flashing to the required length, remove the release film and press down the adhesive bitumen to the previously prepared surface.

    Ensure full contact by smoothing down with a cloth, taking care to eliminate air bubbles.

    Final rolling down of the edges with a wallpaper roller will ensure a good edge seal.

    All overlaps should be a minimum of 25mm and well rolled down.

    Note: In cold weather adhesion will be imporved by storing the roll in a warm room for 12 hours or more before

    use, or by gently warming the strip during application.Do not apply below 5.

    Self adhesive tape must be lapped a minimum of 2 in. (50 mm) on both side and end laps. Position

    the membrane for alignment with release paper in place. Roll back, remove release paper and press firmly in place. When membrane is entirely in place, apply firm pressure over entire surface to ensure full contact.

    The best method to ensure full contact is to roll entire surface of bitumen tape with a J Roller.

    When using membrane with brick ties, position membrane, press in place and cut for ties or projections.

    Orient laps shingle fashion to shed water.

    3. Thickness:

    1mm,1.2mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm.

    4. Width:


    5. Length:

    3m, 5m, 10m, 15m, 20m


    Self adhesive bitumen tape is designed for use as a concealed self-adhered air and vapor barrier membrane

    and protect against rain and moisture penetration. Self adhesive bitumen tape is commonly used to prevent

    drafts and provide a weather tight seal around windows and doors, joints in sheathing, sealing around skylights and as a flashing in residential construction.

    must be clean of oil, dust and excess mortar. Strike masonry joints flush. Concrete surfaces must be smooth

    and without large voids, spalled areas or sharp protrusions. Concrete must be cured a minimum of 14 days

    and must be dry rubber bitumen tape is applied. Where curing compounds are used they must be clear resin

    based, without oil, wax or pigments.


    • Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood.

    • Impermeable to air, moisture vapor and water.

    • Easy to install peel and stick application.

    • Factory controlled thickness.

    • Membrane is self-sealing when penetrated with self tapping screws or nails

    Buy 1.0mm-4.0mm aluminum foil self adhesive bitumen flashing tape for roofing/ waterproofing/sealing at wholesale prices
    Send your message to this supplier
    To: Please input your companyname!
    Characters Remaining: (0/3000)
    Inquiry Cart 0