Chemical Polydadmac 90% PH 3-6 Cationic Macromolecule Flocculant
Trade name: PDADMAC powder
|Trade name||Cationic macromolecule flocculant powder|
|PH (1% Aq. solution)||3-6|
|Viscosity (1% Aq. solution)||5-50 cps/lv, 2#, 60rpm.25|
PDADMAC is organic synthetic macromolecule polymers, which is
widely used in industrial waste water and surface water
purification, as well as sludge thickening and dewatering.It can
improve water clarity at a relatively low dose.It has good activity
that fast the sedimentation rate.It is suitable for a wide range of
This product is also used in the colliery waste water, papermaking
waste water, oil field and oil refinery oily wastewater and urban
Recommend Using Method:
The product need to be prepared in factories equipped with dosing
and distribution device .It is in need of sustained moderate
stirring. Water temperature control between 10 -40 ℃. The required
amount of this product depends on the quality of water or
characteristics of sludge, Ior judged by experiment.
Packing: 25kg lined woven .
Transportation: avoid moisture, insolation and press.
Storage: Kept in a cool, dry and dark place, temperature is between 0 to 40
. Use it as soon as possible, or it may be affected with damp.
Storage period is six months if stored properly.
Health and safety: No contact with eyes and skin, adopt the hygiene
standards of industry. Be aware of leakage, it is very stick-slip
when absorbing moisture. The solution of this product is corrosive
to iron, copper and aluminium.