Saw Blades HSS Cold and Cut-Off Saw / MBS Hardware / for metal
tubes and pipes / diameter from 175mm up to 550mm
Mainly used for cut-off steels and alloys with hardness between
500N/mm2 and 800N/mm2. This high speed steel saw blades are used on
manual, semi-auto, and fully auto sawing machines to cut tubes and
pipes open sections, and solid sections up to 200mm.
Quality: for indutrial and professional market
Bore: all sizes and upon request, including 25.4mm, 32mm, 40mm,
50mm, 90mm, ect.
Teeth number and steel thickness could be adjusted upon request.
Hook agle could be adjusted upon request.
Other sizes and specifications:
|Diameter (mm)||Bore (mm)||Plate thickness (mm)||Teeth number|
HSS Saw Blade and Cold Saw Blades
Cold Saw Blades are designed to cut ferrous and non-ferrous metals. Cold Saw blades are made from M2 HSS steel and M-35 (5% cobalt)
for stainless and tool steels. Our cold saw blades are heat treated
to 64-65 HRc and triple tempered and press quenched to ensure
flatness. These blades are specifically suited for use on manual,
semi-automatic and fully-automatic cold saws. Cold saw blades
operate at slow speeds typically 10-50 RPM when cutting ferrous
metal but can run faster when cutting non ferrous metal. Contact
our highly experienced sales department for recommendations on
cutting speeds and the proper tooth count. Flood coolant or at the
least a mist spray is highly recommended for optimal cut quality
and blade life. When ordering please specify the type of material
being cut so the correct tooth geometry is furnished for your job.
Cold saw blades are commonly listed in millimeters (converter tool). If you do not see your size, contact us for availability.
Cold Saw Blades are available with PVD coatings as well (scroll
down to see images). PVD coatings increase the surface hardness and
allow for increased speeds and feeds. The proper PVD coating is
determined by the material being cut, the saw being used and the
method of coolant application eg. flood, mist or no coolant.
Contact our sales department for technical recommendation when
considering PVD coatings.