Manual Switching Automatic Turnover Machine For Steel Sheet Turning
Automatic Turnover Machine Overview
Automatic Turnover Machine Basic functions:
This machine is specially used for the turning requirements of
steel sheet, and achieves the working target of turning the object
The machine can be placed on the level ground or placed in the pit.
The weight of the pit must be greater than 5 tons/m2. (Based by the
Automatic Turnover Machine Basic operation:
Manual switching, cyclic operation.
Automatic Turnover Machine process description:
1 First put the product into the turning machine with the driving
or forklift, start the operation button, the pressing mechanism
automatically presses down (hydraulic) to fix the product, the
turning machine starts to turn over, and the pressing mechanism
automatically resets (hydraulic) loose after the product completes
180° turning. Open the product, drive or forklift to remove the
product; start the reset flip button, flip the machine to reset.
The main material is Q235 high quality carbon steel
Shaft material is made of 45# high quality carbon steel
3 Processing technology
Equipment body frame welding
Automatic Turnover Machine basic characteristics
- The double-row chain drive makes the turning part of the turning
machine work more smoothly and reliably.
- Using super worm gear reducer makes the transmission power of the
equipment more safe and reliable.
- The four-wheel mechanism with reasonable structure has a stable
- When the 180° is turned over, the double protection switch device
(mechanical limit switch and electric limit switch limit) is used
to make the turning machine safer.
- When the raft is up and down, the flip table is stable.
- After the flip is completed, the flip ends to automatically stop.
- Using the emergency stop button makes it possible to quickly stop
the flip in an emergency.
- The unit can be stopped at any position during the flipping
- Products centered into the center of the turning machine working
- The unique flip surface design ensures that the product fits close
to the flipping body, and the turning operation is smooth and safe.
- Use a jacking or lowering mechanism.
- Using synchronous mechanical structure to ensure uniformity and
stability of the whole machine.
- Product nature: Pressure does not damage the product itself.
The main parameters:
|Name:||Automatic Turnover Machine||Operation:||Manual Switching|
|Steel Plate Size:||Length 1250mm, Width 780mm, Height 100-500mm;||Pallet Size:||800mm × 700mm × 120mm;|
|Application:||Steel Sheet Turning||Weight:||2.5T|
|Serial number||Name||Brand model number||Remarks|
|1||Motor reducer||Germany DEMAYR (Hangzhou factory)||1.5KW|
|2||Hydraulic||Taiwan brand or homemade||3.7KW|
|3||Switch, knob, contactor||Schneider||Matching motor box|
Main performance indicators
|Item number||content||Indicator requirements||Definition and condition of performance guarantee value|
|1||Single flip time||90 seconds ± 10%||Single flip 180° time|
|2||Maximum turning capacity||3000kg|