Categories | Gloss Car Vinyl Wrap |
---|---|
Brand Name: | ShengHui |
Model Number: | SHCNCM-01 |
Certification: | SGS |
Place of Origin: | Guangdong, China |
MOQ: | 1 Roll |
Price: | USD 250/ Roll |
Supply Ability: | 200,00 Rolls/Month |
Delivery Time: | 5-7 days |
Packaging Details: | 1.52*18m |
Face Film:: | Polymeric Calendered Vinyl Film |
Face Film Thickness:: | 4.8 MIL (120 µm) |
Surface Finish:: | Glitter & Diamond |
Adhesive Type:: | Clear Removable Acrylic Adhesive |
Adhesive Thickness:: | 30 µm |
Release Liner:: | PET Release Liner/Air-Egress PE-coated Paper Liner |
Thickness:: | 60 µm/140gsm |
Max Durability:: | Up to 5 years |
Slidable Anti UV Air Release Swipeable Gloss Yellow Metallic Car
Wrap Film
Product Name: Yellow Metallic Gloss Car Vinyl Wrap Slidable Anti UV 5 Years
Durability
Product Description:
Product Features:
Product Specfications:
1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
Surface Finish: | Glitter & Diamond | Color: | Silver | |
2. Adhesive | Type: | Clear Removable Acrylic Adhesive | ||
Thickness: | 30 µm | Color: | Clear | |
3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
4. Max Durability | Up to 5 years | |||
5. Product Size | Width | Length | ||
(metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) | |
1.27 | 50 | 18 | 20 | |
1.52 | 60 | 23 | 25 | |
Notice: There is a Minimum Order Requirement for Special Product Size. |
Product Application:
Advantages of Applying Car Wrap Film:
FAQs:
Hand washing is best for vinyl wraps, but brushless or touchless
car washes can be just as safe. You can even use a pressure washer
if you’re gentle.
Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
The best way to ensure a wrap will last is to keep the car in a
garage. If you don't have a garage, invest in a good car cover. You
should handwash the car with soft microfiber towels. Automatic car
washes are off-limits: The harsh brushes could scratch or lift off
the wrap.
1. Finally, use Turtle Wax Label & Sticker Remover or Bug &
Tar Remover to remove any adhesive residue from the surface of the
panel.
2. Use the heat gun to evenly heat the surface of the wrap to about
120 °F (50 °C). This will loosen the adhesive so you can pull it
off. Use a non-contact infrared thermometer to confirm you aren’t
overheating, which can lead to excessive adhesive residue left on
the surface.
3. Pull the wrap away from the edges at a steep angle, pulling the
wrap back on itself at 15 to 20 degrees. When the wrap gets hard to
pull, reheat and start pulling again.
4. Use your fingernail or plastic scraper to pull the wrap from the
edges of the entire panel. It’s going to look gnarly, but it’ll all
be gone in a few minutes.