Textile Weaving Machine , Sizing Machine With Four Squeezing
Sizing machine is driven by several frequency conversion
This machine is suitable for various production, different count,
high density, cotton and polyester blended yard sizing.
The beams will through re-bean, sizing, drying, waxing and winding
process to fit weaving loom. The nominal width of the machine is
240, 300 and 360 cm.
Technique parameter and Construction characteristic
- Warp beam creel
- According to different warper, equip with different warp beam
- H-shaped high and low warp beam creel. 4 pieces are made of one
group. The structure is firm with smooth and steady operation.
- Φ800mm and Φ1000mm warp beam creel are picked out by user.
- It is adopted with pneumatic belt or chain brake and feedback
control to keep unwinding tension consistent.
- Sizing box characteristic
- Double immersing rolls and four squeezing
- Working width: 1800mm /2000mm
- Max. Pressure: 40kN
- Stainless steel cover, beautiful and durable.
- Pneumatic squeezing, high-pressure 40KN for high-pressure sizing.
- Integrated main sizing box and assistant sizing box into one body,
which loops countercurrent to keep the liquid viscosity and
- Shaft end of sizing roll is sealed through air seal +high pressure
packing +sealed bearing.
- According to the consumption of liquid, pneumatic ball valve
automatically controls feeding to guarantee the supply of liquid.
- Wet split
- Water-cooling type split rod changes with the machine speed, as can
reach good hairiness turn down.
- Drying chamber Characteristic
- It is adopted with 12 drying cylinders Φ800mm. Of stainless steel,
2 groups to pre-dry and I group to combination dry. The surface of
pre-drying cylinder is coated.
- Wet yarn of each sizing box is either split to pre-dry, or not
split into pre-dry.
- The yarn obliquely pulls on drying cylinder, which does not
combined drying is with positive transmission.
- The route in wet area is short and the loss of the warp stretch is
- Can carry on low-tension and low stretch control to reduce stretch
- Set 5 places of temperature auto control for drying cylinder. There
are 4 places to pre-dry, one group has 2 pieces, and combined
drying one place.
- Winding diameter: Φ110-Φ800mm or Φ1000mm
- Winding tension of yarn sheet: 6000N
- Headstock with large package, adjustable width and wide
adaptability can be matched variously shuttle looms and shuttleless
looms at home and abroad.
- The requirement of AB double-beam shutteless loom with wide width.
- Max winding tension 6000N.
- Winding-up tension is set stepless. The scope of tension control is
wide which is suitable for different variety
- The changing speed is 0.5m/min. to exchange the beam without
stopping machine. Continuously sizing without spot.
- Can set different diameters to suit for the different dimension
beams and different variety. The sizes of wind-up can display at
- The independent laid-up switchboard can avoid the influence of high
temperature and high humidity.
- Warp beam change, beam pressurization, length-measurement roller
and tension roller are adopted with pneumatic control.
- Person-computer interface
- Even in the equipment operation can read at will and observe the
- The various diagram and data read and editing (the set point is
adjusted with the real value at real time.
- The touched keyboard. There is the cryptogram guard ability.
- System control
- By way of data bus, the advanced controller, computer and servo-
requency conversion system are combined together to form the
control system of high precision.
- The data communicates rapidly with strong disturb capacity and good
- Achieve long-distance detection. Have the function to diagnose
troubles, convenient and practical.
- The computer system can set. Adjust, display each technology
parameter, and store, print each technology parametric curve.
- PLC controls the whole set program and action.
- The whole machine is adopted with the multiunit synchronous drive.
Stretch at each area can be set and controlled automatically.
- Squeezing force varies the linear change along with the speed of
- The regain can be widely measured with high precision and
stability. It can completely realize display and auto-control.
It can be used on different types of textile machinery including
draw frame, simplex and ring spinning frame. It has already been
tested in many mills in China and overseas market like Vietnam,
Pakistan, Bangladesh, etc. After long period market application and
technical improvement, the quality of Q.C. rubber cot is acceptable
by our customers.
Tell us your need, we will give a satisfied solution