FSC 100% A Bond phenolic WBP glue C/D grade Full Radiate pine
CDX plywood is a kind of economical plywood . Usually CDX plywood
are sanded but not polished . So the face/back of CDX plywood is
rough . Some knots and knot holes exist in the face/back .
CDX Grade comes from US voluntary plywood Standard PS1-95 for
Construction and Industrial Plywood established by APA The
Engineered Wood Association.
C： Tight knots to 37.5 mm (1-1/2 in.). Knotholes to 25 mm (1 in.)
across grain and some to 37.5 mm (1-1/2 in.). Synthetic or wood
repairs. Discoloration and sanding defects that do not impair
strength permitted. Limited splits allowed, stitching permitted.
C-grade veneer minimum permitted for Exterior panels.
D： Knots and knotholes to 62.5 mm (2-1/2 in.) width across grain
and 12.5 mm (1/2 in.) larger within specific limits. Limited splits
permitted. Stitching permitted. Use of D-grade veneer limited to
Exposure 1 panels.
phenolic A BOND WBP glue
From 3 mm up to 25 mm
1220 / 1250 x 2440 / 2500 mm
The specification for a structural plywood, based on customers'
requirements, should cover the following parameters:
Features and Benefits
*Easy to handle, low in weight, High nail-holding ability;
*Consistent in size and performance,
*Low in cost and available in sheet form.
*Good weathertight and waterproofness.
CDX - Unsanded panel specially designed for structural subfloor
decking, wall and roof applications. Can also be used for shipping
crates, pallets and pallet bins, shelving, partitions, and other
construction and industrial applications.
Hot Tags: FSC C/D pine commercial plywood, China, suppliers,
manufacturers, factory, buy, cheap, price
Natural UV Lacquered Oak Engineered Wood Flooring
F17 Formply Plywood
Anti Slip Wire Mesh Film Faced Plywood
Hexagonal Wire-mesh Anti Slip Film Faced Plywood
UV Lacquered Teak Parquet Flooring
45 Degree Oak Engineered Wood Flooring