Drawer Fronts Five Piece Drawer Fronts

Choose Your Drawer Front Style

Great looking custom cabinet drawer fronts, finished with state of the art equipment, at prices that will make you smile!Turnaround time on finished doors/drawer fronts is 10-12 work days and may vary by workload.

Start by viewing and selecting your options below and choosing your finish then just use the menus above to select those options and click on the "add to cart" button to see the final price of your drawer fronts.With prices this good, you'll see why we can't show these outside the cart! Pricing in the menus above represent PER SQUARE FOOT option prices. Your shopping cart will reflect the actual per door price. Five piece drawer fronts have a minimum charge size of 1.75 square feet.

* As you progress through the pulldown menus above, just add up all of your selected options. This is your price per square foot.Multiply your price per square foot by the square footage of your door and you have your drawer front price. (Height x Width)/144=Square Feet There may be a slight variance based on calculation methods.

Here are some suggestions for mounting your drawer fronts to your drawer box:

• Pre-drill two to four holes through the front end ofthe drawer box (two for smaller drawer fronts and four for larger drawerfronts). The pre-drilled holes should be the same or slightly largerdiameter as the wood screw you will use to attach the front.
• Install the drawer box in its location.
• Use some foam type double stick tape and place the tape on the front of the drawer box. Use one or two strips, enough to hold the drawer front in place.
• Press the drawer front onto the drawer box.
• Align the drawer front vertically and horizontally with the surrounding drawer fronts and doors.
• Once you have adjusted the alignment of the drawer front, clamp or hold the front in place.
• Insert screws from inside the drawer box into the drawer front, being careful not to over tighten.
• At this point, if there is a gap between the drawer and the front, caused by the foam tape, you can take out the screws, remove the tape and re-attach the drawer front to the drawer box.

Drawer boxes with 1/2" thick sides can use a 1" wood screw to attach the front to the drawer box. Drawer boxes with 5/8" or 3/4" thick sides will require a wood screw of 1-1/4".
(Be sure to check the combined thickness of your drawer box and drawer front to insure that the screw you use will not penetrate through the face of the drawer front. Be sure that your screw length is 1/8" to 1/4" less than this combined thickness.)

Don't forget, we are standing by to help you!
Just call us Monday - Friday 8:00am to 5:00pm (Central)

Choose Your Wood Species

Choose Your Finish Colors

*(Not all finishes available on all wood species due to compatability)

Choose Your Framing Edge

Edge profiles denoted with an asterisk (*) are NOT recommended for use with Euro, demountable or Inserta style hinges.
Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.If you are seeking an exact match, contact us for a sample.

Choose Your Framing Bead

Choose Your Panel Style

Solid wood panels may be comprised of multiple pieces of wood joined together to achieve the necessary width. Inverted panel IP115 is charged as raised pa

We, at The Cabinet Guy, trace our roots back to the 1980's in the Houston multi-family housing business.  Initially offering replacement cabinet doors and drawers to the apartment and rental home market, we quickly grew to include countertops, cabinets and remodeling/restoration.

In 2002, The Cabinet Guy relocated to the "Golden Triangle" area of the Texas Gulf Coast and opened our custom cabinet business.