Car Pressure Shell
This Auto Pressure Shell part is made of ductile cast iron QT450-10
material, with BH160-22 Brinell hardness, Yide casting uses
automatic molding casting to make sand module green sand
casting/clay sand casting.
The weight of this iron casting auto part is about 5kg/set.
Yide casting manufactures these grey iron casting products with a
- Don’t allow any defects on the surface of truck casting items, such
as porosity, trachoma and cold partition.
- The product burr should be handled cleanly, for better installing
and using of our casting customer.
- It is absolute to manufacture a real dimensional accuracy of the
machining not exceed the tolerance, according to your’ drawing
requirements. Yide casting always designs a reasonable machining
and processing steps to reduce the clamping step, so that Yide can
ensure processing accuracy and maximize the production of casting
Electrophoresis Treatment of Iron Casting Parts
Yide iron casting always does electrophoresis treatments on the
surface of the iron casting product, so that coated a protective
film on the cast gray iron parts surface.
The electrophoresis treatments of casting items not only can
prevent corrosion and rust during the use of the product
effectively, but also decorate the iron cast items surface more
beautiful and smooth.
|Product Name||Car Pressure Shell|
|Casting Type||Ductile Iron Casting|
|Casting Module||Sand Casting / Clay Sand Casting / Green Sand Casting|
|Casting Manufacturer||YiDe Iron Casting|
|Quality Control||Spectrum Analyzer, Three-Coordinate Detector, Metallographic
Analyzer, Tensile Testing Machine Imported From Germany.|
|Standards||ASTM A48, ISO 185, DIN 1691, EN 1561, JIS G5501, UNI 5007, NF
A32-101, BS 1452, IS 210, UNF, NBN 830-01, AS 1830, SS14 01, NS11
|Machining Requirements||grinding to mirror for top and bottom side|
|Defects Requirements||Zero defects for both top and bottom side, and inside|
|Inspection Method||visual, dimensional, X-ray inspection|
Car Pressure Shell
Yide iron casting factory comes from China, is a professional iron
casting, steel casting and brass casting manufacturer, provides OEM
service for our automatic trailer accessories casting customers.
The first step of an order beginning is to make a module according
to your requirement. Yide has a high advance molding equipment to
make automatic parts molding, can make a high hard sand molding
according to the module design.
YiDe iron casting manufacturer has two types of sand to make
casting module reusable sand and disposable sand. Thus you can
choose suitable sand according to your needs. Of course, the
reusable sand module needs more cost than the disposable sand
Melting and Pouring
As you think, the raw material of iron casting is pig iron, Yide
Stainless Casting needs to melt these pig iron, and pouring these
liquid pig iron into the sand module so that we can get an original
Inspection Before Producing
When the Yide iron casting factory gets an iron casting order,
there will be some requirements of chemical composition, such as
So Yide stainless casting must have strict inspection before big
After melting & pouring, passing the inspection, Yide will
arrange the production of truck iron cast parts. Then do machining
for these rough gray casting parts, make them look more beautiful,
and have good dimensional accuracy according to the requirements.
Various CNC equipment and Machining Cente